Baptism: Holy Spirit Dove and Water

$20.00
Shipping calculated at checkout.
  • 8.5" x 11"
  • gold shimmer vinyl and gold colored ink
  • 140 LB white artist's quality card stock

The Benedictine Order's website gives a great explanation of it’s meaning on its website (osb.org/the-medal-of-saint-benedict) but here is an excerpt:

“There is no special way prescribed for carrying or wearing the Medal of St. Benedict. It can be worn on a chain around the neck, attached to one’s rosary, kept in one’s pocket or purse, or placed in one’s car or home. Some of the faithful often put the medal into the foundations of houses and building, on the walls of barns and sheds, or in one’s place of business. The purpose of using the medal in any of the above ways is to call down God’s blessing and protection upon us, wherever we are, and upon our homes and possessions, especially through the intercession of St. Benedict. By the conscious and devout use of the medal, it becomes, as it were, a constant silent prayer and reminder to us of our dignity as followers of Christ.

The medal is a prayer of exorcism against Satan, a prayer for strength in time of temptation, a prayer for peace among ourselves and among the nations of the world, a prayer that the Cross of Christ be our light and guide, a prayer of firm rejection of all that is evil, a prayer of petition that we may with Christian courage “walk in God’s ways, with the Gospel as our guide,” as St. Benedict urges us.”

Base: 18” x 5.5” x 1.25”, hard wood base with 3 slits, a dowel hole, painted white or brown.

Wall Shelf Base: 18” x 5.5” x 1.25”, hard wood base with 3 slits, a dowel hole, painted white or brown. May sit on tabletop or be hung on a wall. Two 3D printed inset keyhole wall hanging devises are built into the back. Two screws and two wall anchors included. Note: the shelf weight limit is minimal, as it was designed to hold paper products and lightweight items.

mini Base: 9” x 5.5” x 1.25”, hard wood base with 3 slits, painted white or brown.

Wall Shelf mini Base: 9” x 5.5” x 1.25”, hard wood base with 3 slits, painted white or brown. May sit on tabletop or be hung on a wall. Two 3D printed inset keyhole wall hanging devises are built into the back. Two screws and two wall anchors included. Note: the shelf weight limit is minimal, as it was designed to hold paper products and lightweight items.

Crucifix: 10.25” x 4.25” x .5”, 3D printed in-house, gold

Rosary: 6.5”, elastic-strung, using wood beads, clear marine recycled glass beads (14mm), gold clay cross, brass charm

Candle: 2.25” tall x 2” round, frosted plastic with logo, LED battery, timer

Candle Holder: 2” round, gold, 3D printed

Holy Water Vial: 2.75” x .75”, 3 oz. glass vial (empty), 3D printed

Holy Water Vial Holder: 1.5” x 1”, gold, 3D printed

Dove Ornament: 3.5" x 3.75" x 1.25", white & gold, 3D printed

12” Wood Dowel: gold

8.5" x 11" Artwork: Gold shimmer custom illustration printed on 140 LB artist quality card stock (heaviest available).

Personalized 8.5" x 11" Artwork: Gold shimmer custom illustration printed on 140 LB artist quality card stock (heaviest available). Customer's name artistically designed and printed, using smudge-proof, scratch-proof and fade-resistant ink.

5" x 7" Artwork: Custom illustration printed on 140 LB artist quality card stock (heaviest available), using ink that fade-resistant, smudge-proof and scratch-proof. Gold shimmer vinyl is then applied.

4" x 6"  Verse Card: Custom illustration printed on 140 LB artist quality card stock (heaviest available), using ink that fade-resistant, smudge-proof and scratch-proof.

4.25" x 2.5"  Prayer Card: Custom illustration printed on 140 LB artist quality card stock (heaviest available), using ink that fade-resistant, smudge-proof and scratch-proof.

2.5" x 2.5" Name Card: Gold shimmer cross applied.

2.5" x 2.5"  Personalized Name Card: Customer's name printed on 140 LB artist quality card stock (heaviest available), using ink that fade-resistant, smudge-proof and scratch-proof.

Wall Shelf Note: the shelf weight limit is minimal, as it was designed to hold paper products and lightweight items.

3D Printer Note: The Be Still Shop has multiple 3D printers that run continuously to output many of our creations. 3D printing process creates endless design and manufacturing possibilities while being versatile and durable. The material used - Polylactic Acid (PLA) filament - is a recyclable, natural thermoplastic polyester that is derived from renewable resources such as corn starch or sugar cane. The filament is biodegradable under certain conditions with high heat capacity and high mechanical strength. 

Rest assured that your package is securely wrapped and shipped for a joy upon receiving it for yourself or as a gift! You can reuse when you switch out elements during the liturgical season.

Free Shipping over $50
  • Orders are typically processed within 7 business days after payment confirmation. Thanks for your patience, we are working hard to make your purchase right and get it to you quickly.

We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.

Your happiness is our priority. If you're not completely satisfied with your purchase, we offer a full refund within 30 days from the date of purchase. We want you to feel confident when shopping with us - knowing that we stand behind the quality of our products. Full Policy here.